Saturday, April 17, 2010

UPCYCLED STORAGE

I'm one of those people that has a hard time throwing some things away. And by things, I mean trash. Before anything gets put in the recycled bin, I question wether or not it can be upcycled instead of recycled. Here's an example of how I upcycled some Quaker Oat canisters into some twine storage.

I use twine for lots of things, but mostly for wrapping gifts and creating texture on other things I upcycle.




Measure the height of your canister (a standard oatmeal container is approximately 7 inches high)

With straight edge, draw a line lengthwise across your paper (I used a decorative wrapping paper). Trim on the line to create your "wrap" for the canister.

Test out your "wrap" to make sure your height fits snugly and to see how much excess paper you have wrapping around. You'll want to trim the excess off, leaving at least a quarter of an inch to overlap.

Once you've practiced wrapping your paper around your canister and you're happy with how it fits, its time to adhere your paper for real. I used doublestick tape for this project because its less messy and I knew it would hold well onto both surfaces - the cardboard container and the paper. You can also use PVA glue applied with a foam brush. Whatever you use, you'll want to have a smooth adhesive layer so that no bubbles or wrinkles form in your paper.

Apply your paper over your adhesive. Make sure to go slowly and check yourself along the way to keep your edges lined up. Once you've gone all the way around, add adhesive to your extra quarter inch and adhere that over where you started with your paper.

For the lid, trace around the circle and trim just inside of the line you drew (the oatmeal container lids cannot be removed from the plastic, which is why you have to trim a little inside of your line). Depending on your container, you may need to cut directly on your trace line.

Test out your circle to see if it fits, you may need to trim a little extra. Once you're happy with how it fits, use adhesive to set it in place.

Punch a hole in your lid that is large enough for your twine or ribbon to fit through. I used a 1/8th inch punch. I recommend NOT putting your hole in the center because the friction created between the twine and lid top is stronger if it is off to one side, which will help your twine from sliding back down into the container.


Finally, place your twine or ribbon in your container and thread the end through the lid before putting the lid back on your container.

There ya have it. A handy little storage for ribbon or twine.
Got any unique upcycled creations you've made? Please share! Any other ideas of what to do with empty oatmeal canisters? They are such a great size, I'm sure there are so many ways to reuse them.

Friday, April 16, 2010

FRIDAY 5 AT 5: DAVEY

On Monday, the 19th, Davey and I will celebrate our 2 year wedding anniversary. We've had such a great adventure these past two years. So, taking the risk that some of you may just sign off now (kthxbai), I'd like to share 5 of my favorite things about Davey that, perhaps, only his wife would know - with some random photos tossed in:

1. Davey is very affectionate: I believe its the little things that count and I'm a total romantic. So when Davey takes the time to come up behind me while I'm cooking and give me a hug, it means the world to me. He holds my hand when we're walking around town or the mall, he puts his arm around me in church, and he even makes sure to give me a hug and a kiss when he gets home from work - everyday. All of these little moments of affection remind me how much he loves me and that that love is constant.


2. Davey is a hard worker: From day one, Davey has put a lot of effor t into his day job. He's on call most evenings, conducts phone meetings with his team in India at 9pm our time, and he's always willing to help solve a problem - even if its helping out another team. Dave also has a great work ethic at our house. When we're working on a house project he gets really into it and has a lot of fun, and finds ways to make even the toughest jobs fun for me. He's also ready to lend a hand to friends when they move and he loves to help out at church. The best thing is that even though he likes to get down to business, he's still really fun and lighthearted.


3. Davey is not a very picky eater: I'm so grateful he's up for eating just about anything I cook. I also try to be a good wife and leave out the few things I know he absolutely will not eat (mayonaise, for example). But overall he always tries new dishes I make and lets me know, in a polite way, if they need improving in the future (i.e. more sauce next time or less peppers next time). Davey also loves to grill when the weather is nice, which I love, so I can give him a marinated piece of meat and he'll fix it up just right on the grill for the both of us.


4. Davey takes really good care of his things: I noticed this right away when we first started dating, and he's still at it. Sometimes I can find this frustrating (because I take less care of my things), but overall Dave has the right idea. He keeps his car really clean, he tweaks his computer every now-and-then to make sure its performing well, and he washes his sweaters separately and on the delicate cycle (I was 3 loads: darks, whites, jeans and if it can't go in one of those 3 categories, I don't buy it). He's not overly OCD about anything, but he just likes to get as much out of what he owns as he can.

5. Davey loves me: Basically, he puts up with me and he seems happy about it. He wants me to have the things that I want and he wants to help make my dreams a reality. He also wants to skip out on work most mornings just to lay in bed beside me longer (but he also wants to provide for our little family, so he does get up and go to work). I am truly blessed to have such a wonderful man to love and serve, but more than that I am blessed to be loved by him, everyday - no matter what.



Feeling mushy? Wanna share five things you love about your significant other? Give me the funny, the sweet, the romantic - I love it all! (Mom, here's your chance to share about Dad. Do it. Comment now. I know you wanna.)

Thursday, April 15, 2010

THE DAVEY AWARDS

It has taken some time to put this post together due to a number of long, drawn-out processes. But I can finally share with my readers that I won 2 Gold Davey Awards last year (see, told ya it has taken a while). No, my husband was not the sponsor of these awards - but it has made for some pretty good jokes - and no, I did not slay two giants (I've never actually met a giant).

The Davey Awards is an international competition, focused on honoring work from small design firms. There were over 4,000 entries from ad agencies, interactive agencies, production firms, in-house creative professionals, graphic designers, design firms, and public relations firms in the 2009 competition. I entered one printed piece into two separate categories, and it took gold in both categories!

The Davey is judged by the International Academy of the Visual Arts (IAVA). Entries are judged on their merits based on a standard of excellence as determined by the IAVA, considering the category entered, on a ten point scale. Generally, Gold Winners receive a score of 9.0 or above. No more than 10% of entries are awarded a Gold Davey.

So, what does a designer get for winning gold? Bragging rights, pride and warm fuzzies.
What does my employer get for me winning gold? Two gorgeous gold statuettes to put on their wall of awesome (which they totally have the right to do because not only did they pay the fee for me to enter the competition, but they also paid for the statuettes).

The Davey Awards statuette is custom designed and handcrafted by the producers of the Golden Globe Award. It is approximately one foot tall, and weighs over 5 pounds. The statuette represents a modern interpretation of the icons of the story of David and Goliath: David defeated the mighty Goliath with a big idea and a little rock. That's the sort of thing in-house designers do every day. The Davey Awards honors the achievement of the "Creative Davids" where strength comes from ideas, intelligence and out-of-the-box thinking, not a "Giants" bankroll (and hey, I work for the government, so you know my budget is basically $0.00 for every project). Look how shiny:
The base plate is custom engraved to show the date, company name and title of the piece that won (this is a shiny photo from the Davey Award website).




I entered the City of Redmond's Water Quality Report that I designed back in April of 2009. Here is the cover:

Here are a few of the inside pages so you can see the layout.

This 8.5 x 11 inch booklet has a lot of pretty boring information in it (unless you're a geologist or biologist and love words like "cryptosporidium"), so it was really important that the design be eye-catching so that the residents of Redmond would actually read some of it and learn how clean their drinking water is and how it got that way.



We even had a little party at work to celebrate. My Davey came as well as the Mayor:

John Marchione, Mayor of Redmond

My three Daveys!



I apologize for the extended length of this post, but this is a really big deal in the design world and I wanted to be sure to commemorate all of it so that years from now when I'm looking back through posts, I can remember just how awesome all of this was.

Wednesday, April 14, 2010

MA NOUVELLE TABLE

TA-DA!!! Here's our new kitchen table, in all her glory:


I know some of you are thinking, wow, Kristen, two whole posts about your kitchen table. Its not that big of a deal. Well, you spend 8 hours of one of the rare sunny days (a Saturday I might add) sanding this table top to bottom (and a leaf that's not shown) until your hand falls off, THEN spend the next rare sunny day (ANOTHER Saturday) painting and staining it for 5 hours, AND THEN seal the entire thing with a clear coat of protectant the next clear day (oh, wait, yes...another Saturday) and tell me you're not proud to show this little lady off.

I used Minwax Polyshade (stain and polyurethane in one): Bombay Mahogany Gloss to stain the top of the table and Behr Cottage White to paint the bottom of it. I then went back over the white and distressed the highlight areas, using some of the stain over the exposed areas to match the top of the table.

During this process I also realized that the table was never fully built because two of the claw foot legs have not been fully carved. Here you can see a completed one



And one that was started (with quick notches), but never finished.


Its not noticeable (obviously I didn't realize it until after a year of owning the thing), but I love that character about her.

She was worth it. She is beautiful. Here she is a little gussied up (with some new chair covers that are in desperate need of finishing on the bottom -- any ideas? I was thinking lace or ruffled linen?):



I'm ready for some entertaining....who wants to come over for dinner?

Tuesday, April 13, 2010

SUR LA TABLE

Or, as the Americans say, "on the table".

When we moved into our current house this time last year I was in need of a new kitchen table because our large glass dining table would not fit into our small kitchen. I scanned Craigslist and found a wooden table for $40. It looked something like the one below, except not in as good of condition. The finish was pretty beat up with worm holes and even a little mold on the top....eew.

I had big plans for re-fininshing the table by painting it a bright cranberry color. I was excited to have a bright piece of furniture in our mostly-white kitchen and the idea of a cranberry colored table was pretty unique. So I painted just the top of the table to see if we could handle having a "fuschia" table in our lives. You can see the top of the table from this picture used in a previous post.




We're talkin' deep fuschia.

We handled it...for a whole year. Then, I decided I wanted something more classic and country that suits a simple kitchen. I love old farmhouse tables, they just exude "good warm family dinners together" for some reason.



Not only would I take any of those tables, but just package up any one of those kitchens and I'll be good to go. Check back tomorrow for the big reveal of "ma nouvelle table" -- "my new table"!

Sunday, April 11, 2010

CATCHING SOME WAVES

We had a pretty windy day last week, but we still needed to exercise Jazz and we all really needed to get out of the house for a bit. Our area has community property on the lake so we can go down there anytime we want, but we had to bundle up because of the fierce wind. Davey and I have yet to get Jazz to swim (mostly because it really has been too cold and Jazz probably won't get in unless we do) but we want him to be familiar with water so he's not completely scared of it.

Needless to say, the wind was making some pretty good waves on the shore of the lake and Jazz wasn't scared of them. In fact, he kinda just wanted to eat them.



We may not have a water dog (yet), but we definitely have a clown that never ceases to surprise me with silliness.

Saturday, April 10, 2010

ROBOTS AND MONSTERS

If you would like to donate money to charity, support artists, have a good laugh, and get me a gift all the same time, you could buy me one of these:

horde, fuzzy, cuddly

Its a one-of-a-kind drawing of a robot or monster from robotsandmonsters.org. This site allows you to donate money for an original work of art (robot or monster illustration) which is inspired by three words of your choosing. Then, an illustrator will interpret your three words to create your drawing. You get the original drawing in the mail and a percentage of your donation goes to the artist and another percentage goes to support charity. The charity changes once a year and currently it is Doctors Without Borders. You can see all the whoosies and
whatsies rules here.

Below are a few of my favorite illustrations and the 3 words or phrases that inspired them:

pirate ship, stars, marmot



blue, hungry, dog


cute, pink, plumpy


tall, archeologist, adventurous


ocean, soup, engagement ring



If you're into collecting art or supporting artists, I highly recommend you checking this out. For the extremely reasonable price of $50 (for high-quality original artwork), you could be the new owner of your very own customized creature!