I'm one of those people that has a hard time throwing some things away. And by things, I mean trash. Before anything gets put in the recycled bin, I question wether or not it can be upcycled instead of recycled. Here's an example of how I upcycled some Quaker Oat canisters into some twine storage.
I use twine for lots of things, but mostly for wrapping gifts and creating texture on other things I upcycle.


With straight edge, draw a line lengthwise across your paper (I used a decorative wrapping paper). Trim on the line to create your "wrap" for the canister.

Test out your "wrap" to make sure your height fits snugly and to see how much excess paper you have wrapping around. You'll want to trim the excess off, leaving at least a quarter of an inch to overlap.

Once you've practiced wrapping your paper around your canister and you're happy with how it fits, its time to adhere your paper for real. I used doublestick tape for this project because its less messy and I knew it would hold well onto both surfaces - the cardboard container and the paper. You can also use PVA glue applied with a foam brush. Whatever you use, you'll want to have a smooth adhesive layer so that no bubbles or wrinkles form in your paper.


Apply your paper over your adhesive. Make sure to go slowly and check yourself along the way to keep your edges lined up. Once you've gone all the way around, add adhesive to your extra quarter inch and adhere that over where you started with your paper.

For the lid, trace around the circle and trim just inside of the line you drew (the oatmeal container lids cannot be removed from the plastic, which is why you have to trim a little inside of your line). Depending on your container, you may need to cut directly on your trace line.

Test out your circle to see if it fits, you may need to trim a little extra. Once you're happy with how it fits, use adhesive to set it in place.

Punch a hole in your lid that is large enough for your twine or ribbon to fit through. I used a 1/8th inch punch. I recommend NOT putting your hole in the center because the friction created between the twine and lid top is stronger if it is off to one side, which will help your twine from sliding back down into the container.





2 comments:
Um, I LOVE that. Srsly. =)
I am considering buying oatmeal just for the cartons..ha. Really though, I love twine and how it makes a wrapped package look. I am thinking I might forgo ribbons this Christmas and try out twine.
Twine is my best friend when it comes to wrapping, making crafts, and party decorations. Its simple, cheap, and cute.
Post a Comment