Sunday, June 6, 2010

UPCYCLE: CANVAS TOTES

Remember THIS POST on upcycling some empty oatmeal containers into smart storage for ribbons, yarn and twine? Well, I'm back at it - rescuing some simple swag tote bags and upcycling them into some swanky totes.

I made my first upcycled tote last year for my friend Katie's birthday present and I was hooked. I love this project because it combines several of my favorite things: the hunt, painting, and sewing. Plus, if you're like me, you can have 10 or 12 of them going at one time and irritate your husband with how much space you've claimed in the house with craft stuff! Here's how you can make your very own custom tote bag:

[NOTE: This is not a very detailed tutorial, because it would take forever to post each little part, but I've tried to share the main parts which should help you along. If you see anything challenging that I've left out, please let me know and I'll be sure to share and add it to the post. Thanks!]


**********************************************
THE HUNT

Go to your local thrift store or swag festival and find a simple canvas tote. For this project it is important that the bag be made out of thick canvas. Don't worry if there are logos or images screenprinted on the bag (thats probably why they were given to the thrift store in the first place) because we'll be painting over it.

I was blessed with two huge free flat-bottom totes from where we board Jazz when we go on vacation!

Buy (or scavenge) your new-found tote and get excited about transforming it!!!!




**********************************************
PAINTING


Lay the bag flat and insert a piece of cardboard inside to keep the paint from bleeding through. Tape off your edges using masking tape (I've tried painters tape, but it doesn't hold well enough to the canvas)

Prime your area using white paint - I use acrylics in most of my craft projects because its easy to mix colors, they're cheap, and they dry quickly.


Next, paint your desired background color. I like to line my bags with fabric, which I'll talk about in a minute, so I try to match my painting colors to that of my lining fabric. You could also paint first, then decide if you want to line your bag or not, and try to find a matching fabric (but I have found this to be difficult, since sometimes its hard to match fabrics to paints, its easier to match paints to fabrics).

Use a piece of light-colored chalk to sketch out your design if you want. Don't use a pencil because your lines will show through the paint. Or, just freestyle your painting!

Complete your painting before removing the masking tape. I like to outline my paint area with a large permanent marker before removing the tape to create a crisp box/frame around the edge of my painting, but this is all up to you and how you want your painting to look.

This tote is already looking waaaay better. Rini inspected it and said he liked it as well.
(By the way, check out Katie's kittens inspecting her amazing upcycled pillow!)


**********************************************
SEWING


If you'd like, you can skip this step, but I like to line my bags - especially those that have had something screen-printed on them - because when you look in the bag, you can still see the reverse image that was printed:

This is my tote after painting, turned inside out, so you can see what I'm talking about


So, if you want to line your bag, here's how:
Turn your bag inside out and measure the width and height from fabric edge to fabric edge (not seam to seam). Fold your fabric, right sides together, in half and cut your lining fabric an inch larger than your tote on all sides, using the folded side as your bottom. For example, my tote (when turned inside out) measured 18"wide x 19"tall, so I cut my fabric to be 20"wide x 21"tall, being sure to keep the fold at the bottom.


Sew along the two open sides a quarter inch inside. At this point, you're essentially making a simple bag to put inside of your tote. If your tote bag has a flat-bottom, like mine, you'll have to mimic the bottom corner diagonal seams to make your liner flat-bottomed as well. See THIS TUTORIAL or THIS TUTORIAL for more explanation (both ways work well).


Put the lining inside of your tote and pin the corners together, this will keep your lining from bunching up on the inside while you sew the top.


Turn the top of your lining down in between the fabric and tote until it lines up with the bag seam. Pin the fabric edge all the way around.


Sew the lining to the top of the tote bag an 8th of an inch from the top of the fabric.

If you want, you can turn the whole tote inside out and stitch the side seams of your liner to the side seams of the tote for extra stability.


**********************************************
FINAL TOUCHES

If you want to cover up the thread that is the result of sewing the top of the liner to the bag, you can use ribbon to cover it up.

Just put a bead of glue down the thread line and carefully apply your ribbon to the top. Use glue or thread to secure the ends of the ribbon to the edge seam of the bag.



**********************************************
TA DA!!

Its very easy to turn two kinda-sorta-odd swag totes into two one-of-a-kind pieces of functional art!

I lined the bag with the bluebird painting with a matching blue/turquoise fabric and added a green ribbon to the outside top.

I lined the lovebird bag with the floral fabric shown in the tutorial and added a yellow ribbon to the top. (I like birds, can you tell?)


Please share your results if you try out this project. I'd love to see what you come up with. The customization options with this project are endless! I'm thinking painted fruits and veggies for eco-friendly grocery totes, or a custom painted monogram for a bride or mom-to-be. What are your ideas?



1 comment:

San Smith said...

this is great! I'm going to link to it on my blog :)